The Environmental Waste Benefits of LED Lighting


LED lighting rather than incandescent lighting is better for the environment in several ways. If you are among those who will like to promote green living, then you should start using LED bulbs. They produce a lot of light while utilizing less electrical energy. It is the best way for you to avoid excessive burning of fossil fuel as a way of meeting high energy needs. For example, if a big city can switch to LED lighting instead of traditional forms such as incandescent, then there will be huge savings on the energy consumption which will reduce the number of fossil fuels burned to produce electricity.

The Environmental Benefits of LED Lighting

They Are Energy Efficient
The tendency of LED lights to consume less electrical power and convert most of it into light leads to saving of energy. When lighting a bulb in your home, you don’t need heat. The LED bulbs will always produce the highest amount of light hence allowing you achieve the highest efficiency possible. The savings on energy helps in reducing the energy demand in cities which will have forced people to access energy from sources which can lead to environmental pollution. For example, if the energy consumption in lighting a town is too high, more coal or gas may be burned to meet the energy needs. It is a different case if you can utilize the energy-saving bulbs which use –

LED’s Are Ecologically Friendly
When searching for the best eco-friendly lighting system, you should settle on LED lighting systems. There is no use of harmful chemicals such as mercury in their manufacturing. You will have lighting systems in place which will not expose you to any danger of harmful gases. For example, if you decide to have fluorescent lamps in place, they end up producing hazardous materials to the atmosphere after they are broken. They also don’t require special contracted waste removal and recycling services like from Waste Focus and similar companies (

There Are Zero UV Emissions
The illumination of LED produces less infrared light and almost no UV emissions. If you are about to install lighting fixtures in areas where the materials stored can be affected by UV rays, you should opt for the LED types. They produce almost zero UV rays which can affect the environment. The ability of the lights to produce tiny UV rays makes them among the best systems you can buy and install in areas such as museums, stores where art galleries are stored among others. They tend to produce just the right amount of light for you to avoid environmental pollution due to too much light production.

Take a look at the environmental damage that comes with the use of incandescent and florescent lighting:

Incandescent vs. LED Christmas Lighting


When it Comes to Incandescent vs. LED Christmas Lighting, there are several factors you should take into consideration. In the Christmas tree lighting, you are looking for different colors so that you can achieve unique decorative features. Both incandescent and LED bulbs can be utilized in the light production, but there are certain limitations which make bright lighting systems less preferable. Nowadays LED driven systems have dominated the scene of Christmas tree decorating due to different factors.

With this having been said and gotten out there, here are some great factors that may help you in choosing incandescent vs. LED lighting systems.

1. The Service Life Of The Lighting Systems

When taking into consideration the service life of the two lighting systems, you will realize LED bulbs perform better than incandescent light fixtures. Incandescent bulbs are designed to self-destruct. They run an electrical current through a filament. The filament can degrade with time hence reducing the lifespan of the bulb. It is unlike LED technology which is highly durable.

2. It’s Energy Efficiency

It is necessary to utilize energy economically. Incandescent systems burn filaments to produce light. It is an inefficient way of producing light because most of the energy is wasted in the form of heat. It is unlike LED bulbs which convert up to 90% of electrical power into light. Incandescent bulbs will only convert 20% into light while wasting the rest in the form of heat.

3. Heat: Cool Vs. Hot

There is no fear of pets or children playing close to your Christmas tree lit with LED bulbs. Even if they are left alight for several hours, they remain cool to touch. It is unlike incandescent bulbs which burn filaments to produce a lot of heat which can pose a danger to your pets or children if they play close to the Christmas decoration lights made out of hot bulbs. For a more thorough explanation of risk of fire, Myth Busters performed an experiment – check it out.

4. Color Output: It’s True Colors

The diodes in LED bulbs generate real colored lights. If you decide to go for blue, the diodes will produce the blue color. It is unlike bulbs which produce only white light and leave you to cover the filaments with colored bulbs. The color generated by the LED bulbs is vibrant and attractive for your Christmas decoration to stand out. You may prefer to have different colors in your Christmas decorations. The bulbs are very efficient in allowing you achieve the perfect colors in your decoration.

For you to choose the best between Incandescent vs. LED Christmas Lighting, it is necessary to compare features of the two lighting systems so that you can decide on the best which can meet your specific needs. In general, LED lighting systems score highly in the comparison.


A Brief History Of LED Light Bulbs


To fully understand the history of LED lights, let us step back a little bit and try to gain a clearer picture, through a literary definition of course, and find out what ‘LED’ means. ‘LED’ stands for ‘Light Emitting Diode.’

An LED is a light emitting diode that, well, emits light. Seems simple, right? It only shines when it is connected directly to an electric current, and it works on the property of electroluminescence. They have extremely low power consumption when compared to the traditional light bulb (which, by the way, was invented about a hundred or so years prior) which works similarly. They also last much longer.

In the year 1907, an English inventor and scientist by the name of Henry Joseph Round discovered something extraordinary. He realized that whenever a ten-volt current was applied to ‘carborundum,’ it emits a yellowish light! Carborundum is also known scientifically as silicon carbide, for you science-heads out there reading this.

In the very same year, 1907, a Russian scientist named Oleg Vladimirovich Losev discovered it as well! In the year 1927, about two decades after it was created, Oleg decided to publish the first scientific text on LEDs. For many decades, though, no progress was made. Any and all possible scientific research was geared to chemical, explosive, atomic and nuclear weapons from the time of the First World War (The ‘Great’ War, as it was known) to the Second World War.

However, two Americans from Texas University ‘rediscovered’ the fact that an infrared light emits when a current is sent through another block of carborundum. Later that year, the two scientists, having been named Gary Pittman and Bob Biard, filed for a patent on the supposedly ‘new’ technology.

At first, LED’s (light emitting diodes, to recap) was very expensive. This insane price was very unfortunate for the average person, as it meant that they were unusable to the public and this led to further development stopping for another decade and a half or so. Because of this high pricing, they were only used in government or highly advanced scientific or medical machinery and systems.

And then it happened, for better or for worse. A company by the name of Fairchild Semiconductors reduced the price of individual light emitting diodes (LED’s) to merely 5 CENTS! Yes, you heard me, a nickel a piece. He succeeded in doing this insane marginal price drop by finding a new and safer way to produce this new kind of light emitting diode.

Instead of the traditional form of creating them, he created a unique process to manufacture them. It involved using what is known as a planar process that was applied in the production of semiconductor chips to produce the light emitting diodes. By using this brand new and incredibly innovative process of creating and packaging them, Fairchild made the new ‘LED’ into a commercial product with a variety of applications. You have already seen the incredible variety of uses that LED’s have today, and can only fleetingly think of the amount of money that same company, Fairchild Semiconductors, must make in royalties today.

Are LED Lights Worth the Money?


With an array of lighting options available on our shelves, can it be said that LED lights worth the money? To answer this, we have to delve deeper into the costs of various forms of lighting to determine if this is, in fact, indeed the case. You may initially believe that doing so is a waste of time, but when you consider the money you spend on electricity each year, it makes sense save money wherever you can.

The first concern that people have regarding LED lights is the initial cost of purchasing them. They are considerably more expensive than the regular incandescent lights that you will be used to as it is not unusual to pay over $10 for a single LED light. Of course, this depends on the size and brightness so prices can vary.

However, we need to look at the benefits that come with using these lights to decide whether or not it is an investment that is worthy of your hard-earned money.

If we look at the electricity, then it is estimated that the average household can reduce the part of their bills connected to lighting by approximately 20% just by switching to LED lights. Now, add that up over a year, and you can begin to understand how it is capable of making a significant difference.

We can take this point further by looking at the average costs of running a typical bulb. The average ball park figure for a regular incandescent bulb running for five hours per day over two years will be in the region of $32 for the electricity. This can vary slightly depending on the costs from your electricity supplier, but it’s good enough to give you an idea.

Now, if we turn to a single LED light running for the same period, then the cost can be as low as $12 which is a significant saving. You get the same level of light, but it doesn’t burn the same size of a hole in your pocket.

We can take one straightforward and elementary fact into account to help us form our decision. By the scientific method of deductive reasoning, we have found out that LED based systems to draw less power than orthodox light bulb systems would. Again, from this one simple fact alone, we can deduce that they are worth the money.

When you then throw in that they last longer, are less likely to break, and are available in a range of brightness levels, then changing each bulb to LED lights makes so much sense. When it doesn’t have a detrimental effect on you, then one wonders why it could have ever been in doubt, to begin with.